Zennio Z41 Handbuch PDF herunterladen (Seite 24)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

3.3.4. 2-BUTTON CONTROL AND ICON INDICATOR

The boxes parameterized as ‘2-button control and icon indicator’ will have two control buttons, one

on the left and another on the right side of the box, whose icons can be configured via the

parameters "Left Button" and "Right Button", respectively.

Figure 3.14: 2-button control and icon indicator

This is generic control used to communicate with KNX devices that are manipulated via their

objects. In addition it is possible to view the current status of the KNX device reflected by the

central icon indicator.

The boxes configured as a ‘2-button control and icon indicator’ can be one of two types; Binary or

Enumeration.

Binary: When selecting this option, two new 1-bit communication objects will be shown:

"[Home x - Box y] Binary Control" and "[Home x - Box y] Binary Indicator", which allow the

Z41 to manipulate KNX devices by sending a binary value "0" or "1". One of the following

behaviors can be selected:

 Left 0 - Right 1: Every time the left button is pressed (short press), the value "0" will

be sent to the bus via the object "[Home x - Box y] Binary Control" and the icon

configured in "Off Icon" will be displayed. Every time the right button is pressed (short),

the value "1" will be sent and the icon configured in "On Icon" will be displayed.

 Left 1 - Right 0: Every time the left button is pressed (short press), the value "1" will

be sent to the bus via the object "[Home x - Box y] Binary Control" and the icon

configured in "Off Icon" will be displayed. Every time the right button is pressed (short),

the value "0" will be sent and the icon configured in "On Icon" will be displayed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 52 53

Keine Kommentare

Zennio Z41 Handbuch Seite 24